Front & Side Benches

Parts Summary

Assembly

• Benches: Use 16 x K screws to secure the brackets to the front and side of the grill.
• Rail: Remove the two screws holding the rail in place (inside the side bench) and attach the rail to the outside of the bench. This is what the condiment basket can hang off.
• Basket: Use 3 x K nuts to secure the bracket onto the condiment basket.

Benches Overview

How to Use

Put On and Remove Bench

• Both the front and side benches can be easily put on and removed.
• This is handy for bringing food to and from the grill.
• Align the two holes in the front of the bench with the pins on the brackets and push straight in and then lower down to lock into place.

Lock Bench

• The bench can be temporarily locked so it cannot be taken off
• Two swing plates underneath the bench can be pushed across to block the hole that that pin passes through.

Fold Down/Up

• While holding the bench on both the left and right sides, lift up vertically all the way, then swing the bench down.
• Rotate back up and push down to lock back in the flat, upright position.

Cleaning

• Wipe down with soft cloth and any common kitchen surface cleaner or BBQ spray.
• To clean more stubborn stains, polish along the brushed grain with Jif or Bar Keepers Friend (or equivalent) to remove any rust or other blemishes. 
• Although high quality 304 grade stainless steel used for the benches, it can still develop “tea staining” brown corrosion spots if near the coast or swimming pool. 
• To remove rust spots, use ultra-fine wire wool together with Jif, Bar Keepers Friend or equivalent stainless steel cleaner. Take care to rub with the brushed surface pattern where applicable.
• Do not use a stainless steel steel cleaning ball or coarse cleaning pad or brush as it will scratch the stainless steel.